Offering over thirty years (total) experience in all aspects of Proposals [including SBIR] and Proposals Management and participation, Reliability, Maintainability, System Safety, Human Factors/Engineering, Testability/Health Monitoring, Transportation, Design Test, Components, Integrated Logistics Support, Life Cycle Cost Analysis, Contracts, Quality, Configuration Management and Program Management.

Very highly proficient in MS Word, MS Excel, MS Powerpoint, MS Access, MS Project, MS Publisher, Adobe Acrobat, Netscape, Adobe Reader, Powertronics and RELEX (Reliability Prediction, Maintainability Prediction, Failure Mode and Effects, Criticality Analysis (FMECA)), Reliability modeling deveopment, HyperText Markup Language (HTML), and Internet Search Engines.

Analyze digital media storage devices and provide Reliability Analysis and Failure Rate Predictions consulting expertise to IO Interconnect (2006 to present)

Analyze Redundant Array of Independent Disk (RAID) architectures and provide Reliability Analysis and Failure Rate Predictions consulting expertise to Medéa (May 2003 - Present)

Analyze Redundant Array of Independent Disk (RAID) architectures and provide Reliability Analysis and Failure Rate Predictions consulting expertise to IMC Networks (August 2001 - Present)

Analyze Redundant Array of Independent Disk (RAID) architectures and provide Reliability Analysis and Failure Rate Predictions consulting expertise to MTI Corporation (June 1999 - Present)

Provide software and hardware Reliability Failure Rate Predictions and Failure Modes, Effects, and Criticality Analysis (FMECA) consulting expertise to Borg-Warner Automotive Powertrain Systems Corporation (July 1998 - Present)

Provide ISO 9000 consulting expertise to Putnam RF Components, Inc. (April 1998 - Present)

* Authored company home page and provide continued support;
* Provide ISO 9000 consulting expertise.

Perform and manage the performance of Engineering Specialties tasks for The Boeing Company (June 1995 - Present)

* Manage and perform Integrated Logistics Support tasks on Delta IV Rocket system, GPS IIF, EKV, NMD LSI, and International Space Station;
* Provide Reliability, Maintainability, Human Factors and Integrated Vehicle Health Management (IVHM) expertise to Space Transportation Architecture Study, Satellite Rescue/Transfer Vehicle, X-37 Advanced Technology Vehicle, Space Maneuver Vehicle, and related space vehicles.

Perform and manage the performance of Design and Design Specialties tasks for Luna Defense Systems (March 1993 - Present)

* Review and analyze Design Test Plans/Procedures and Acceptance Test Procedures;
* Provide System Safety, Reliability, Maintainability and Human Engineering services;
* Provide design and support services.

Provide Reliability Design Analysis and Failure Rate/Mean Time Between Failure (MTBF) Analyses to Storage Concepts, Inc. (June 1996 - Present)

* Analyze Redundant Array of Independent Disks (RAID) designs and provide Reliability and MTBF Analyses.
* Provide Integrated Health Monitoring expertise.

Provide Reliability Design Analysis and Failure Rate/Mean Time Between Failure (MTBF) Analyses to Andataco (August 1996 - Present)

* Analyze Redundant Array of Independent Disks (RAID) designs and provide Reliability and MTBF Analyses.

Provide failure analysis and MTBF analysis to Delta Sigma (July 1992 - Present)

* Analyze high power microwave transmission and power supply circuitry for principal failure modes;
* Perform MTBF/failure analysis;
* Provide ISO 9001 consulting expertise;
* Authored company home page and provide continued support.

Provide Reliability, Maintainability, and System Safety Analysis to American Microwave Technology (1992 - Present)

* Analyzed Reliability, Maintainability and System Safety aspects of National Weather Service Wind Profiler System;
* Performed failure analysis and provided recommendations for product improvements to system to increase MTBF and other system performance parameters;
* Successfully presented Wind Profiler System Reliability, Maintainability and System Safety review to National Weather Service.

Provide Reliability and Failure Mode and Effects Analyses to Pacific Precision Products (April 1995 - Present);

* Analyze design of aircraft personnel oxygen valves for various types of commercial aircraft;
* Perform Reliability Analyses and Failure Mode and Effects Analyses on oxygen valves.

Provide Reliability, Design and Statistical Analyses to SHURflo (April 1994 - April 1996);

* Analyzed statistics of several lines of bag-in-the-box pumps for statistical trends;
* Provided Mean Time To Failure, Mean Time To Repair, and other parameters for SHURflo Customers;
* Provided design analysis to support new line of more robust pumps currently in use.

Provide Reliability, Maintainability, System Safety, Human Engineering and Integrated Logistics Support services to Vickers Los Angeles (Sterer) Engineering and Manufacturing Division in support of the V-22 Program Braking System; (September 1994 - March 1995)

* Researched, developed and produced the following V-22 documents for Vickers Sterer-Bell-Boeing V-22 Helicopter Braking System components: Hydraulic Brake Master Cylinder; Utility Isolation Valve; Parking and Brake Transfer Valve Module; and, Pressure Reducer/Relief Valve:

** Reliability Program Plan;
** Reliability Prediction Report;
** Failure Mode, Effects and Criticality Analysis Report;
** Maintainability Program Plan;
** System Safety Program Plan;
** Subsystem Hazard Analysis Report;
** Safety Assessment Report;
** Maintainability Prediction Report;
** Maintainability Analysis Report
** Life Cycle Cost Analysis Report.

Provide Reliability, Maintainability, System System, Human Engineering and Integrated Logistcs Support services to Parker Hannifin Control Systems Division in support of the F/A-18E/F Servoactuator Programs; (March 1993 - December 1993)

* Researched, developed and produced the following F/A-18E/F Trailing Edge Flap Servocylinder Program documents for McDonnell Douglas and/or Naval Air Systems Command (All documents were initially accepted as completed):

Reliability Stress Analysis and Prediction Report;
** Failure Modes, Effects and Criticality Analysis Report;
** Maintainability Prediction Report;
** Maintainability Design Criteria;
** Preliminary Hazard Analysis Report;
** Subsystem Hazard Analysis;
** Human Engineering Program Plan;
** Human Engineering Design Criteria;
** Inputs to the Logistics Support Analysis and Level of Repair Analysis;
** Supportability Design Influence Process;
** Life Cycle Cost Data Status;
** Preservation and Packaging Data Report;
** Support Equipment Recommendation Data;
** Support Equipment Tools List.

*Researched, developed and produced the following F-22 Vehicle Management System documents:
** Reliability Analysis Reports (includes Reliability Prediction, FMEA, and FTA) for

***Horizontal Tail Servoactuator;
***Rudder Servoactuator;
***Flaperon Servoactuator;
***Leading Edge Flap Control Module;
***Bleed Door Actuator;
***Bypass Door Actuator; and,
***Inlet Servoactuator Control Module.

**Reliability Analysis Report and Integrated Diagnostics and Testability Report (includes Test Requirements Document (TRD), FMEA, Organizational and Depot Level step-by-step task analysis) for the F-22 Bootstrap Reservoir.

*Provided Proposal and Preliminary/Critical Design Review Reliability, System Safety, Maintainability and Life Cycle Cost analyses in support of the following Commercial Passenger Aircraft:

**MD-11;
**Embrear 145;

and,
Military Aircraft:

P-116 (Super Heavy Lift Lift Blimp) Proposal

Provided Reliability, Testability, Maintainability, System Safety, Human Engineering, and related services to Wenzlau Engineering in support of the Ground Based Radar Prime Power Unit, TRW SDI Power Van, and Loral World Wide Prime Power Interface Unit: (January 1994 - June 1994)

* Researched, developed and produced the following documents:

**System and Subsystem Hazard Analyses;
** Preliminary Hazard Analyses;
** Reliability Predictions and Stress Analyses;
** Test Equipment and Testability Analyses;
** Maintainability Predictions and Task Analyses;
** Human Engineering Analyses and Design Checklists;
** MANPRINT Program Plan;
** MANPRINT Analysis Report;
** Mean Time Between Overhaul Analyses;
** NBC Maintainability Analyses
** Life Cycle Cost Analyses.

Managed and/or performed the following activities for HOPE Associates, Inc.; (June 1991 - June 1996)

* Provided/managed Data Analysis, Office Managerial and Report Production expertise to Dames and Moore;
* Reworked Passenger/Crew Seat technical manuals for Weber Aircraft Company;
* Performed/managed Logistics Support Analysis Record development for the Delco Electronics electromechanical LAV-25 Turret;
* Provided/managed automated Logistics Support Analysis Records for the Weber Aircraft, Inc. C-17 Pilot/Copilot and ACM seats.

Totally researched, developed and produced the following documents for NavCom Defense Electronics, Inc., (June 1990 - June 1991)

* MIL-HDBK-217E Reliability Prediction and MIL-HDBK-756 Reliability Analysis for the Space Shuttle TACAN;
* MIL-STD-470A Maintainability Analysis for the Space Shuttle TACAN;
* MIL-STD-1629A Failure Mode, Effects and Criticality Analysis (FMECA) for the AN/URN-25 TACAN {Accepted on the initial submission};
* MIL-STD-756B Reliability Analysis, MIL-STD-470A Maintainability Analysis and Assessments (RMAA) for the AN/URN-25 TACAN {Accepted on the first submission};
* MIL-STD-16400 Equipment Environment Report (EER) for the AN/URN-25 TACAN {Accepted on the first submission} {Due to the FMECA, RMAA and EER being submitted early, the company received $1M in incentive fee};
* MIL-HDBK-217E Notice 1 Reliability Predictions and MIL-STD-1629A FMECA for the AN/APN-232 (V) Altimeter F-16 System-Wide Integrity Management (SWIM) Study;
* MIL-STD-470A Maintainability Analysis for the AN/UPM-155 IFF Radar Test {Accepted on the initial submission};
* MIL-HDBK-472 Maintainability Prediction for the AN/UPM©155 IFF Radar Test Set {Accepted on the initial submission};
* MIL-SPEC NavCom Parts Selection Procedure for all programs {This procedure reduced parts acquisition costs by 60%};
* MIL-HDBK-217E Notice 1 Reliability Predictions, MIL-STD-470A Maintainability Analyses and NAVAIR FLEX-10 Life Cycle Cost Analysis Studies for the AN/URN-25 TACAN Product Improvement Program. {Resulted in $40M sole source contract scheduled awarded in 1993}.

Total responsibility for the following tasks for NavCom Defense Electronics, Inc. (March 1988 - June 1990):

* First Article Test Procedure research, development and production for the AN/UPM-155 IFF Radar Test Set {All were successfully run and accepted by the Customer};
* Planning, structuring, organizing and handoff of the First Article Test (FAT) Program for the AN/UPM-155 Radar Test Set {Contributed significantly to the success of the FAT};
* Automation Integration and Upgrade Program for the Integrated Logistics Support Directorate (included Word Processing, Graphics, Reliability, Maintainability, Logistics Support Analysis Record (LSAR), Life Cycle Cost and EMI Test Software/Hardware acquisitions and implementations) {Resulted in much higher Customer Satisfaction with 2 1/2 times the amount of products/services while reducing personnel to 40% of the original total).

Directly responsible to the Vice President of Honeywell [formerly Allied Signal] Amex Systems Integrated Logistics Support (ILS) for: (June 1987 - March 1988)

All company Field Engineering activities. These included program management of production and maintenance of satellite communications links at five remote sites and three main plants;
* Total profit/loss responsibility for this company business segment to include indirect/direct budgets, marketing, proposals, Customer interface, negotiations, and contract satisfaction {Resulted in a total turn-around in Customer negative attitude and increased a very profitable segment from $100K to $3M in less than one year}.

Total responsibility to the Vice President of Honeywell [formerly Allied Signal] Amex Systems Engineering for:(August 1985 - March 1988)for:

* All company ILS developmental activities; These included all Reliability, Maintainability, System Safety, Human Factors/Engineering and Life Cycle Cost Tasks and products for Radar Test Sets, Aircraft Software Test Sets, Personnel Radars, Space Shuttle Satellite Communication Links, and FAA Weather Systems {All deliverables were submitted ontime and within budget}.
* Led and intensively participated in mathematical calculations of Reliability Probability Of Success (POS) for US Navy Mobile Sea Range Program leading to contract incentive award of $2,000,000.

Researched, developed and produced the following documentation for Rockwell International Space Station Systems Division (September 1984 - August 1985):

* The combined MIL-STD-1629 FMECA, MIL-STD-882 System Safety Hazard Analysis (SSHA) and MIL-STD-470 Maintainability Analysis into one procedure to be utilized for the Space Station and orbiting platforms {accepted by NASA}.
* The On-Orbit Safety, Reliability and Maintainability sections of the Rockwell Space Station Proposal;
* Long-life IR and D studies for the Space Station major subsystems {accepted by NASA}.

Researched, developed and produced the following documentation for the Rockwell International Space Transportation Division (March 1983 - September 1984):

* On-OrbitReliability, Maintainability, Safety and Human Factors/Engineering using Tele-operated and Tele-Presence Subsystems {accepted by NASA};
* On-Orbit Maintenance of the Space-Based Laser System;
* Reliability and Maintainability of the Space Boost Surveillance System;
* Transportation studies for the various potential Space Shuttle Orbiter landing sites.

Total responsibility for the development and production of the Northrop B-2 Document (February 1982 - March 1983)

* Logistics Engineering and Analysis Planning document. This included the total integration of Reliability, Maintainability, System Safety, Human Factors/Engineering, and all classical elements of ILS. {Accepted by the USAF ASD}
* Performed Life Cycle Cost studies for B-2 utilizing several models and various configurations.

To send me a message select this.

address
7071 Warner Avenue, Suite F202
Huntington Beach, California 92647-5495
(800) 798-4673 (voice)
(562) 596-8380 (fax)